Channelside Office Building, Tampa, FL

Halkey - Roberts, St. Petersburg, FL

Nova Southeastern University, Orlando FL

Contractor: The Murray Company

Architect: GMA Design of Clearwater

This is a design/build two-story load bearing concrete tilt wall with a concrete slab and bar joist floor system.

Contractor: The Murray Company

Architect: Conner & Associates Architecture Inc.

This four-story office building is located in the Channelside area of Tampa, FL which features a conventional steel frame, light gauge steel stud exterior, and curtain wall glazing systems.

Owner: Halkey Roberts

Contractor: The Murray Company

180,000 SF Medical manufacturing and Distribution Facility

Owner: Jabil Circuit

Contractor: The Murray Company

Architect: GMA Design

Overall Size: 32 Acre Site, 195,000 sq.ft. under roof

Facility Description: This is a 195,000 square foot two-story office and lab connected to the manufacturing facility. The office portion was framed using bar joists and steel beams with some of the lower roof areas designed for future office loading. The office and lab structure was designed as separate structures to separate the two environments for fire and comfort reasons. The manufacturing areas had some elevated areas with large moving loads due to mechanical or material handling requirements. The exterior office and lab areas were enclosed using insulated pre-cast architectural concrete panels. This structure is an interesting blend of dealing with specialized manufacturing loading due to mechanical equipment and process equipment, combined with an office environment.

Owner: Jabil Circuit

Contractor: The Murray Company

Architect: GMA Design

Overall Size: 63,000 SF corporate office

Facility Description: Located adjacent to a quiet pond and adjacent to an electronic board manufacturing facility required some creative thinking during the creation of structural systems. The client chose a ribbon window facade with a large glass enclosed central lobby core. The structure has a composite steel floor system to provide additional floor loading capacity in heavy file areas and allows the flexibility for future changes in use. The narrow building footprint combined with the adjacent pond that prevented building access from the rear required careful thought in the creation of steel framing details and member selection.

Owner: Nova Southeastern University

Contractor: The Murray Company

Architect: GMA Design of Clearwater

This is a 60,000 SF design build three-story office building with exterior load bearing concrete tilt wall and a composite concrete floor system. The building is supported on conventional spread footings. Interior consists of a large conference center, student lounge, faculty offices, administration headquarters, monumental stair, two elevators, three computer labs, and multi-function classrooms. Exterior has enough space to comfortably include 720 parking spaces.

Owner: Pepin Distribution

Contractor: The Murray Company

218,000 SF Beer Distribution Warehouse constructed of tilt wall. This building has many special features such as a 14,000 SF Storage Facility, a 14,400 SF Maintenance Facility, a 6,500 SF Hospitality Room, a large 32,368 SQ office area, a 147,000 SF Controlled Environment, and a 5,800 SF Keg cooler.

Owner: Pepin Distributing

Contractor: The Murray Company

Greeted with a cascading waterfall glistening with the reflection of torch flames with a high def TV display available for advertising your event. This is a 30,000 SF facility boasting a 468 SF stage, a show style kitchen with an open fire pizza oven, a trophy room displaying 40 years of distributing, a covered beechwood cafe, and a grand ballroom with a main bar with budweiser on tap.

Contractor: Bay Area Building Solutions

Architect: Garcia Seufert Architects

This is a two story load bearing concrete tilt wall building of approximately 45,000 square feet.